Can One Radio Do Amateur And GMRS?

Leave a reply

Is There A Single Radio That Can Do Amateur Radio And GMRS?

This is kind of a trick question.  Technically, there are radios capable of doing this.  And you can buy these radios today.  The inherent problem though is that these radios violate the United States Code of Federal Regulations (CFR) Title 47 and FCC Rules and Regulations for Amateur Radio and General Mobile Radio Service (GMRS) radios to include Family Radio Service (FRS) and Multi Use Radio Service (MURS).

Amateur Radio GMRS

Baofeng UV-5R Pre-2021

Actually, a few years ago there were radios being imported into the United States that were capable of VHF/UHF, FRS, GMRS, and MURS.

If you bought the venerable Baofeng UV-5R prior to 2021 you had all these capabilities.   In 2021 the FCC started disallowing the importation of radios that didn’t meet newly written regulations.

Subsequently, I bought several of these things when I first got my FCC License and still have them all.   The UV-5R’s prior to 2021 were the magic radios that did it all.
Continue reading →

Radio Programming Using Customer Programming Software CPS

1 Reply

GMRS And Ham Radio Programming Using CPS

I think there may be a perception by non-radio users that us Hams simply buy radios and just push the microphone or Push To Talk (PTT) button.   If only it were that simple.  In this day and age most radios come with a hunk of software called Customer Programming Software or CPS.  With that CPS software, the user must create something called a Codeplug.  The Codeplug must then be uploaded to the radio.  This usually entails having a programming cable.  The programming cable almost never comes with the radio and must be purchased separately.  I swear that I will never understand this.

The first time you look at a CPS program it is just a bit intimidating.   So many fields to populated with information you may or may not know about as a new ham.

CPS Customer Programming Software

And I’m mostly talking about analogue radios here.  When I bought my first DMR radio, a Connect Systems CS800, I had no earthly idea what to do next.  I started looking a Codeplug to download.  The problem with that is your Codeplug is pretty specific to your local area.  Subsequently, It should be programmed for your local amateur radio repeaters. For digital radios it will also include your favorite talk groups.
Continue reading →

Best Budget Laser For 2024 – ACMER P1 S Pro

10 Replies

Best Budget Laser For 2024 – ACMER P1 S Pro

ACMER P1 S Pro

ACMER P1 S Pro

Desktop lasers entered the consumer market around 2019.  At that time they were reasonably priced.  This is kind of unusual as new Technology hitting the market usually has crazy prices.   However, as laser engravers evolve they are getting more and more expensive.   Finding a great machine at a budget price these days is tricky.   The folks at ACMER Laser Engraver have provided me their ACMER P1 S Pro ($199) to review.

You heard me right.  $199 on their website.  It is also available on their Amazon store for $199.  There are a variety of bundled laser kits as well which contain various options such as an air assist, honeycomb, machine enclosure, or Lightburn software.

Any time a desktop laser engraver pops up in the $200 or so range it excites me.  And this laser really excites me.  I have MANY desktop lasers that I have reviewed and believe me when I tell you that I can tell the good ones from the bad ones.

The ACMER P1 S Pro is a good one.
Continue reading →

Munbyn RW401AP AirPrint Thermal Label Printer Review

Leave a reply

MUNBYN RealWriter 401 AirPrint Voice Controlled Thermal Label Printer

Munbyn RW401AP Label Printer

Munbyn RW401AP AirPrint Thermal Label Printer

I was recently provided a Munbyn RW401AP  ($299 retail) Thermal label printer to review.   There was zero pressure applied by the nice folks at Munbyn for a positive review.  What you will read here is what I think.

People occasionally send me things to review and it speaks volumes about a product when a manufacturer provides one with no strings attached.  That means they trust their product.

I have owned lots of label printers and primarily use them to print shipping labels.  There are a lot of thermal printers out there that can perform that mission.  So, in this day and age you have to stand out from the pack, with new and cool features.

I believe Munbyn has done just that.

Before I get into this I’d be remiss in not pointing out a couple of connection issues I ran into.   These may or may not impact you as I run a pretty unusual network stack in my home.  In fact they probably won’t impact you.

Let me provide a few details.
Continue reading →

TGIF Network On WPSD Digital Mobile Radio Software

2 Replies

TGIF Network On WPSD Digital Mobile Radio (DMR)

I’ve been using Digital Mobile Radio (DMR) for a few years now.  Essentially, DMR uses the backbone of the internet to communicate.   You can enter that network by using a radio to local DMR repeater connection.  Additionally, most people enter the DMR network by a Hotspot device connected to their own WiFi or Ethernet home network.   The most popular DMR service is the BrandMeister Network, but over time a couple other networks have sprung up.   Today I’ll be discussing how to connect to the TGIF Network.  While TGIF has been around a bit, yours truly just discovered it.  Connecting to it wasn’t as easy as I anticipated so I thought I’d write a few pointers in this blog to hopefully help others.
Continue reading →

Quansheng UV-K6 Radio Review

6 Replies

Quansheng UV-K6 Radio Review

Quansheng UV-K6

Quansheng UV-K6

I own several handheld VHF/UHF radios. Some are for Digital Mobile Radio (DMR) but all do analog or simplex frequencies.  I think just about all of us cut our teeth on the Baofeng UV-5R.  I’m no exception.  I think I have 2 or 3 around the house here somewhere.  On a whim I decided to buy a Quansheng UV-K6 radio which also is designated as UV-K5(8).  FCC ID information can be found here.

I recently purchased a Wouxun KG-Q10H which I really feel is the best handheld I’ve owned so far.

The only reason I picked up this Quansheng UV-K6 was for its ability to flash open source firmware onto it.  Additionally, the radio can be unlocked to transmit on a whole slew of bands.

The bad news here is that of course is against FCC Regulations.  Secondly, because the radio is a VHF/UHF radio, transmitting on any band other than those will be done in milliwatts.  So not only are you breaking the FCC rules, you aren’t really doing anything but spraying out weak transmissions with tons of 2nd and 3rd order harmonics.  In fact I’d recommend NOT unlocking the all the frequencies.  There is a difference between unlocking the radio and unlocking all frequencies.  Those are two separate actions or steps.  Don’t unlock the transmit frequencies so you don’t accidentally do anything illegal. 

Despite all this the radio is SOOOOOO hackable as to be almost irresistible to a guy like me.
Continue reading →

Wouxun KG-Q10H Review

6 Replies

Wouxun KG-Q10H Review

On February 22nd a massive cell phone outage was realized by AT&T and others.  Yesterday on Super Tuesday there was a large scale cyber attack most prominently targeting Facebook and Instagram.  If you dig a bit deeper the attack hit a lot of other prominent sites as well.  Also, a couple of months ago I woke up in the middle of the night and there was no Verizon cellular service and I had no internet with Spectrum.   Clearly it is time to bust out the Amateur Radio Equipment and even to add a new radio to the stable.  Today I’ll be reviewing the Wouxun KG-Q10H Quad Band Radio ($219).

Wouxun KG-Q10H

Wouxun KG-Q10H

Wouxun (pronounced OCEAN) is a Chinese Radio brand sold by “Buy Two Way Radios“.  While most of us amateur radio operators tend to think of Chinese hand held radios as junk, the reality is that the Wouxun KG-Q10H has been tested to death on-line and the results are pretty favorable.

Good power, good audio, and the radio passes all the FCC tests regarding spurious emissions.  Think 2nd and 3rd harmonics.   Conversely, it doesn’t spew RF all over the place like a lot of cheap radios do.
Continue reading →

Taking Better Pictures Cheaply With Canon G7

2 Replies

Taking Better Pictures Cheaply With Canon G7

If you are like me you frequently scour eBay and Facebook Marketplace for great deals.  Or to pick up collectibles or hobby items.  You know as well as I do that there are ads out there with HORRIBLE pictures in them.   Maybe you are guilty of this as well.   I know I have put up some for sale ads before with substandard photos.   This blog may seemingly take a backwards approach to solve the problem.  Most of us think that we need new and better equipment to improve our photos.  That simply isn’t the case.   We can vastly improve our images with a camera that is nearly 20 years old.  I’m going to use the venerable Canon G7.

Canon G7

Canon G7

The G7 was released in late 2006 and unless I miss my guess it was released first in Japan.  I was living in Japan at that time and I was positively giddy at getting my hands on one.

The G7 was a gem however, I had a bad case of upgrade-itis and sold mine and got a G9.  My first thoughts were that I should have never gotten rid of the G7.

And then one day I stumbled across one at a super great price that was in pristine condition and I decided to see if the magic was still there.

The principle allure of using this old camera is that it can be tethered to a computer which is a feature that you just won’t find in non-DSLR cameras these days.  There are a couple of caveats though.
Continue reading →

Tethered Photography

4 Replies

Tethered Photography

Tethered Photography

Tethered Photography

Sometime roughly around the early 2000’s camera makers offered the feature of tethered photography to some of their lower end cameras.   Tethering a camera to a computer allows for stable, hands free shooting.  It also allows the photographer instant feedback on a large computer monitor.   Camera settings can be changed quickly on the computer until the desired results were reached.  This was especially useful in food photography, or in sales and marketing of products.  Hobbyists like me used it for photographing items for sale and for photographing things like coin collections, and even portraits.  As you can see in the pic, you don’t need a fancy studio to get a good shot.

In a nutshell, tethered photography is a PRO FEATURE.  Canon, Nikon, FujiFilm, and Sony had tethered options but Canon mostly led the pack.   With the release of the Canon Powershot G11 in 2009, Canon removed this feature.   I guess they figured out that people wouldn’t purchase high end cameras if they could achieve professional results with less expensive, point and click cameras.

Tethered Photography

Canon A640

Even to this day cameras from this era that are able to be tethered fetch a premium price on the secondary market.  If you don’t believe me, go to eBay and look for a Canon G9 or G10.

Even a 20 year old Canon A640 goes for over $100 still.   It should be noted that I took this photo with a Nikon D7000 It was tethered to an $80 Evolve III Maestro laptop using Nikon Camera Control Pro 2 software.
Continue reading →

Dyson V10 Trigger Replacement

2 Replies

Dyson V10 Trigger Replacement

Dyson V10 Trigger Replacement

Dyson V10 Trigger Replacement

This blog is going to be a little less on the technical side and a little more on the “Right To Repair” side.  I can’t find a receipt for when I bought this Dyson V10 vacuum.  But I did find an email stating my warranty was expiring in May 2023.  I bought it refurbished and I think I paid about $350 for it.  So my best guess is I got it in May or November of 2022.  Let’s call it just over 2 years old.

A couple of weeks ago my wife brought me the vacuum and told me it was broken.   A cursory inspection let me know right away that the trigger was not rebounding. Additionally, it remained in the fully depressed position.

As soon as I went to Google I learned a few things:

 

  1. The trigger on the Dyson V10, V11 and other models is a HIGH FAILURE RATE ITEM.
  2. Dyson won’t sell you a trigger.
  3. 3rd party vendors sell REINFORCED triggers.
  4. Replacing the trigger requires COMPLETELY disassembling the Dyson vacuum.
  5. A Torx #8 screwdriver is required for assembly / disassembly.

Continue reading →